DESCRIÇÃO DO PRODUTO
Mais Informação : https://www.horizonhobby.de/en/product/f-16-falcon-64mm-edf-pnp-efl9875
Introduction
Originally developed for the U.S. Air Force and approved for production more than 40 years ago, the F-16 Falcon brought advances in fighter technology and capabilities that still top many of the aircraft flown by adversaries today. Its record of success with allied countries is outstanding, and it's expected to be in service with air forces worldwide for many years to come. E-flite® pays tribute to the full-scale fighter with the F-16 Falcon 64mm EDF jet that delivers incredible performance in a size suited for smaller flying sites.
Introduction
Originally developed for the U.S. Air Force and approved for production more than 40 years ago, the F-16 Falcon brought advances in fighter technology and capabilities that still top many of the aircraft flown by adversaries today. Its record of success with allied countries is outstanding, and it's expected to be in service with air forces worldwide for many years to come. E-flite® pays tribute to the full-scale fighter with the F-16 Falcon 64mm EDF jet that delivers incredible performance in a size suited for smaller flying sites.
Features
- One of the easiest and most fun to fly F-16 Falcon EDF (Electric Ducted Fan) jet models yet
Scale replica of the world-renowned fighter flown by the U.S. and numerous allied air forces
11-blade 64mm fan delivers great vertical performance and top speed plus turbine-like sound
Factory-installed high-power 4S-compatible brushless motor, 40-amp ESC and 5 servos
- Optional-use fixed landing gear with steerable nose wheel
Bolt-on wings plus optional-use tanks and ordnance
Magnetically-secured nose cone and top hatch
Durable yet lightweight molded EPO airframe
Overview
The E-flite® F-16 Falcon 64mm EDF jet is a scale replica of one of the most recognized and successful single-engine fighters in the world. Its 4S-compatible high-RPM brushless motor is matched to a 40-amp ESC and high-thrust 11-blade fan unit to deliver incredible performance enhanced by a realistic, turbine-like sound. Integrated composites and advanced EPO material form a lightweight, durable airframe that offers precise handling with the factory-installed servos. Nose-wheel steering provides easy ground handling – or you can remove the landing gear entirely for improved scale appearance and performance, plus nearly effortless hand launches when flying over grass. Authentic scale touches include molded-in surface details, a cockpit with pilot figure, plus optional-use simulated external fuel tanks and ordnance. It also arrives factory-finished in a unique scale trim scheme that offers great visibility and makes a strong impression both on the ground and in the air. And it all combines to deliver one of the easiest and most fun to fly Falcon models ever!
The E-flite® F-16 Falcon 64mm EDF jet is a scale replica of one of the most recognized and successful single-engine fighters in the world. Its 4S-compatible high-RPM brushless motor is matched to a 40-amp ESC and high-thrust 11-blade fan unit to deliver incredible performance enhanced by a realistic, turbine-like sound. Integrated composites and advanced EPO material form a lightweight, durable airframe that offers precise handling with the factory-installed servos. Nose-wheel steering provides easy ground handling – or you can remove the landing gear entirely for improved scale appearance and performance, plus nearly effortless hand launches when flying over grass. Authentic scale touches include molded-in surface details, a cockpit with pilot figure, plus optional-use simulated external fuel tanks and ordnance. It also arrives factory-finished in a unique scale trim scheme that offers great visibility and makes a strong impression both on the ground and in the air. And it all combines to deliver one of the easiest and most fun to fly Falcon models ever!
Needed to Complete
- Full-range, 4+ channel transmitter and receiver
4S 14.8V 2200mAh 30+C LiPo battery with EC3™ or IC3™ Connector
Compatible LiPo charger
What's in the Box?
Gear Options
You can install the included fixed landing gear with steerable nose wheel to taxi, take off and land on smooth surfaces. Or you can leave the landing gear off for more speed and vertical performance plus easy hand launches when flying over grass.
Unique Trim Scheme
The factory-applied paint and decal finish replicates the 65th anniversary trim scheme used by the Texas Air National Guard's 149th Fighter Wing – the Lone Star Gunfighters.
Durable Design
Construction with molded EPO material makes it possible to replicate complex detail and shapes in a lightweight yet durable form. The result is an outstanding scale appearance that's easy to maintain and delivers the best possible flight experience.
Compact Convenience
Although the F-16 Falcon 64mm EDF is compact enough to transport in just about any vehicle in one piece, it features bolt-on wings and a magnetically-secure nose cone that are easy to remove/install for even more convenient transport and storage.
Plug-N-Play® Completion Level
This Plug-N-Play (PNP) model comes out of the box with a factory-installed power system and servos that are ready to connect to the compatible receiver of your choice (sold separately). Simply install the receiver, finish any final assembly, and fly!
Approximate Assembly Time:Less than 1 Hour
CG (Center of Gravity):3.5 - 3.7" (90 - 95mm) back from leading edge of wing measured at the fuselage
Charger:Sold Separately
Completion Level:Plug-N-Play
Control Throw - High (Ailerons):Up/Down 0.59" (15mm)
Control Throw - High (Elevator):Up/Down 0.79" (20mm)
Control Throw - Low (Ailerons):Up/Down 0.31" (8mm)
Control Throw - Low (Elevator):Up/Down 0.31" (8mm)
Expo (Ailerons):High Rate 10%, Low Rate 0%
Expo (Elevator):High Rate 10%, Low Rate 0%
Fan Size:64mm, 11 blade
Flying Weight:31.75oz (900g)
Landing Gear:Yes
Length:43.3" (1099mm)
Minimum Required Radio:4-Channel
Minimum Speed Control:40A Installed
Motor Size:2840 3150Kv
Recommended Motor Battery:4S LiPo 2200mAh 30+C LiPo with EC3 or IC3 Connector
Servos:Five Micro Included
Transmitter Range:Full Range Transmitter Required
Wing Tube Length:13.8" (350mm)
Wingspan:28.7" (729mm)
- (1) E-flite F-16 Falcon 64mm EDF Jet Plane with:
- (1) 40A Brushless ESC (installed)
(1) Brushless Outrunner Motor (installed)
(5) Spektrum™ 9-Gram Servos (installed)
(1) Product Manual
- (1) 40A Brushless ESC (installed)
High-Power EDF
The 11-blade 64mm fan, high-RPM brushless motor and 40-amp ESC combine with your 4S 2200mAh LiPo battery to deliver great vertical performance and a fantastic speed range with virtually instantaneous throttle response. But what makes the experience truly rewarding is the fantastic sound produced by the power system – it's almost like a real turbine.
The 11-blade 64mm fan, high-RPM brushless motor and 40-amp ESC combine with your 4S 2200mAh LiPo battery to deliver great vertical performance and a fantastic speed range with virtually instantaneous throttle response. But what makes the experience truly rewarding is the fantastic sound produced by the power system – it's almost like a real turbine.
Gear Options
You can install the included fixed landing gear with steerable nose wheel to taxi, take off and land on smooth surfaces. Or you can leave the landing gear off for more speed and vertical performance plus easy hand launches when flying over grass.
Unique Trim Scheme
The factory-applied paint and decal finish replicates the 65th anniversary trim scheme used by the Texas Air National Guard's 149th Fighter Wing – the Lone Star Gunfighters.
Durable Design
Construction with molded EPO material makes it possible to replicate complex detail and shapes in a lightweight yet durable form. The result is an outstanding scale appearance that's easy to maintain and delivers the best possible flight experience.
Compact Convenience
Although the F-16 Falcon 64mm EDF is compact enough to transport in just about any vehicle in one piece, it features bolt-on wings and a magnetically-secure nose cone that are easy to remove/install for even more convenient transport and storage.
Plug-N-Play® Completion Level
This Plug-N-Play (PNP) model comes out of the box with a factory-installed power system and servos that are ready to connect to the compatible receiver of your choice (sold separately). Simply install the receiver, finish any final assembly, and fly!
Approximate Assembly Time:Less than 1 Hour
CG (Center of Gravity):3.5 - 3.7" (90 - 95mm) back from leading edge of wing measured at the fuselage
Charger:Sold Separately
Completion Level:Plug-N-Play
Control Throw - High (Ailerons):Up/Down 0.59" (15mm)
Control Throw - High (Elevator):Up/Down 0.79" (20mm)
Control Throw - Low (Ailerons):Up/Down 0.31" (8mm)
Control Throw - Low (Elevator):Up/Down 0.31" (8mm)
Expo (Ailerons):High Rate 10%, Low Rate 0%
Expo (Elevator):High Rate 10%, Low Rate 0%
Fan Size:64mm, 11 blade
Flying Weight:31.75oz (900g)
Landing Gear:Yes
Length:43.3" (1099mm)
Minimum Required Radio:4-Channel
Minimum Speed Control:40A Installed
Motor Size:2840 3150Kv
Recommended Motor Battery:4S LiPo 2200mAh 30+C LiPo with EC3 or IC3 Connector
Servos:Five Micro Included
Transmitter Range:Full Range Transmitter Required
Wing Tube Length:13.8" (350mm)
Wingspan:28.7" (729mm)
