DESCRIÇÃO DO PRODUTO
Disponivel em Julho 2019
Mais Informação : https://www.horizonhobby.de/en/carbon-z-cub-ss-2m-pnp-efl12475
Introduction
The original Carbon-Z® Cub was ground-breaking and created a new category for large-scale, electric-powered models. Based on a platform that was known for legendary versatility, its lightweight and exceptionally strong, composite-reinforced and hollow-core design was mostly factory-finished and assembled so it was easier for more pilots to go "BIG" than ever before. The E-flite® Carbon-Z Cub SS 2.1m is an updated and refined version of the original, equipped with a long list of new features for improved flight performance, capabilities and convenience so you can enjoy a giant-scale flying experience unlike any other.
Mais Informação : https://www.horizonhobby.de/en/carbon-z-cub-ss-2m-pnp-efl12475
Introduction
The original Carbon-Z® Cub was ground-breaking and created a new category for large-scale, electric-powered models. Based on a platform that was known for legendary versatility, its lightweight and exceptionally strong, composite-reinforced and hollow-core design was mostly factory-finished and assembled so it was easier for more pilots to go "BIG" than ever before. The E-flite® Carbon-Z Cub SS 2.1m is an updated and refined version of the original, equipped with a long list of new features for improved flight performance, capabilities and convenience so you can enjoy a giant-scale flying experience unlike any other.
Key Features
- An updated and refined version of the ground-breaking and category-creating original Carbon-Z Cub
Giant-scale 84"/2.1m wingspan with lightweight and exceptionally strong composite-reinforced, hollow-core Carbon-Z construction
Drooped wing tip design increases wing and aileron area for significantly improved slow speed performance and control
Thumbscrews with decorative gas caps and snap-on antennas to easily install/remove the two-piece wing without tools
Modified flap design allows them to travel both ways for full-span aileron and other mixing options
Articulated and shock-absorbing landing gear with improved and strengthened mounts
Even larger oversized, tundra-style wheels with softer tires for better ground handling
Fully-molded top and bottom landing gear covers for a more scale-like appearance
More secure rear mount and cross braces for the optional floats (sold separately)
Quick-release, multi-position battery mounting tray fits 4–6S 3200–7000mAh batteries
Improved design motor with added bearing for smoother, more reliable performance
15x7 propeller molded from material that better maintains balance and stiffness
IC5 connector (compatible with EC5 connectors) on the 60-amp ESC for better and more reliable power delivery
Vibrant, high-visibility Carbon Cub SS Signature trim and color scheme
Six factory-installed digital, metal-geared servos with ball-link equipped linkages
Convenient push-button released, top-mounted hatch for easy battery access
Extremely wide scale and mild to beyond-scale aerobatic and wild flight envelope
Tow up to 3-meter span sailplanes with the included aerotow mechanism (servo sold separately)
Needed to Complete
- Full-range 5+ channel transmitter and receiver
4–6S 14.8–22.2V 3200–7000mAh LiPo with EC5™ or IC5™ Connector
Compatible LiPo charger
What's in the Box?
- (1) E-flite Carbon-Z Cub SS 2.1m with:
- (1) 60A Brushless ESC (installed)
(1) Brushless Outrunner Motor (included)
(6) Digital, Metal-Geared Servos (installed)
(1) Product Manual - (1) 60A Brushless ESC (installed)
Overview
The E-flite® Carbon-Z® Cub SS 2.1m makes it easier than ever to enjoy a truly unique and versatile giant-scale flying experience. Based on the original Carbon-Z Cub, it's equipped with an abundance of new convenience, capability and flight performance-improving features. An updated wing design with drooped tips adds wing and aileron area for significantly improved slow speed handling, performance and control. The modified flap design allows them to travel both ways for full-span aileron and other mixing options, and thumbscrews make it easier to install and remove the two-piece wing without tools.
Articulated and shock-absorbing landing gear, equipped with even larger oversized tundra-style wheels with softer tires, offers better ground handling that soaks up the bumps of rough surfaces. The push-button released, top-mounted hatch offers convenient and easy access to the battery compartment – which now holds a quick-release, multi-position battery mounting tray that fits 4S to 6S 3200–7000mAh batteries. An improved motor design featuring an additional bearing, plus a propeller molded from material that better maintains balance and stiffness, results in smoother and more reliable power system performance. The composite-reinforced, hollow-core airframe arrives mostly factory-finished and assembled, and the installed digital, metal-geared servos with ball-link equipped linkages deliver crisp and precise control.
So whether you fly it slow and scale, or perform beyond-scale vertical takeoffs and aerobatics, the Carbon-Z Cub SS will offer unexpected levels of versatility, capability and performance you'll enjoy flight after flight!
More Convenience
Even with its giant-scale 84"/2.1m wingspan, the Carbon-Z Cub SS is easy to store and transport because of the two-piece wing. And now it's more convenient than ever because no tools are required for field assembly/disassembly with the new thumbscrews. There are even decorative gas caps and antennas that snap onto the thumbscrews for added scale detail.
More Capable Gear
The new articulated and shock-absorbing landing gear, which is equipped with even larger oversized tundra-style wheels with softer tires, offers better ground handling that easily soaks up the bumps of rough surfaces. An improved mounting design for the main gear makes it stronger than before, and fully-molded top and bottom landing gear covers deliver a more scale-like appearance.
More Gear Options
An optional float set (EFLA5600) that includes a servo and functional water rudder, plus a new mounting/strut set (EFL12419) that attaches with a more secure rear mount and cross braces, is available separately. Installation is easy, and you have the option to switch between floats and wheels in minutes.
More Practicality
The push-button released, top-mounted hatch offers convenient and easy access to the battery compartment that holds a new quick-release, multi-position battery mounting tray that fits 4S to 6S 3200–7000mAh batteries.
More Reliability
The updated power system features a motor with an improved design that includes an additional bearing, along with a propeller that's molded from material that better maintains balance and stiffness, to deliver smoother and more reliable performance. Plus the ESC is now equipped with an IC5 connector, which is also compatible with EC5 connectors, for better and more reliable power delivery.
Durable Precision
The lightweight and exceptionally strong airframe features composite-reinforced, hollow-core Carbon-Z construction. Best of all it arrives mostly factory-assembled and finished in a vibrant, high-visibility Carbon Cub SS Signature trim and color scheme. It also arrives with factory-installed digital, metal-geared servos and ball-link equipped linkages that deliver crisp and precise control.
Versatile Performance
From smooth and stable slow flight to beyond-scale aerobatics and everything in between, the Carbon-Z Cub SS has an extremely wide flight envelope that's perfect for first-time giant-scale and experienced pilots alike.
Giant Scale
Giant-scale 84"/2.1m wingspan with lightweight and exceptionally strong composite-reinforced, hollow-core Carbon-Z construction
Plug-N-Play® Completion Level
This Plug-N-Play (PNP) model comes out of the box with a power system and factory-installed servos that are ready to connect to the compatible receiver of your choice (sold separately). Simply install the receiver, finish any final assembly and fly!
Aileron:Controlled by two 26g digital metal gear servos
Airfoil Shape:Modified Clark-Y
Approx. Flying Speed:50mph (80kph)
Approximate Assembly Time:Less than 1 Hour
Approximate Flight Time:4-10 minutes
CG (Center of Gravity):4 - 4.7" (102 - 120mm) from leading edge of wing measured at fuselage sides
Charger:Compatible with selected battery (sold separately)
Completion Level:Plug-N-Play
Control Throw (Flaps):0.71" (18mm) take-off, 1.6" (40mm) landing with 2.0 sec speed
Control Throw - High (Ailerons):Up, Down 1.8" (45mm)
Control Throw - High (Elevator):Up 0.98" (25mm), Down 0.59" (15mm)
Control Throw - High (Rudder):Left, Right 0.98" (25mm)
Control Throw - Low (Ailerons):Up, Down 1.6" (40mm)
Control Throw - Low (Elevator):Up 0.71" (18mm), Down 0.39" (10mm)
Control Throw - Low (Rudder):Left, Right 0.59" (15mm)
Elevator:26g digital metal gear servo
Expo (Ailerons):Low Rate 5%, High Rate 10%
Expo (Elevator):Low Rate 5%, High Rate 10%
Expo (Rudder):Low Rate 5%, High Rate 10%
Flaps:Yes
Flying Weight:8.15 - 9.48lb (3.69 - 4.30kg)
Landing Gear:Fixed main with steerable tail wheel
Length:56.3" (1430mm)
Minimum Required Radio:4-channel (sold separately)
Minimum Speed Control:60A
Propeller Size:15x7E
Recommended Motor Battery:4-6S 4000 - 7000mAh LiPo (sold separately)
Retracts:No
Rudder:26g digital metal gear servo
Servos:Digital metal gear mini installed
Spinner Size:2.4" (62mm) orange
Stabilizer Tube Length:10.63" (270mm)
Stabilizer Tube OD:0.27" (7mm)
Transmitter Range:Full
Wing Area:1130 sq in (72.9 sq dm)
Wing Loading:16.6 - 19.3 oz/sq ft (50.7 - 59.0 g/sq dm)
Wing Tube Length:28.75" (730mm)
Wing Tube OD:0.55" (14mm)
Wingspan:84.6" (2150mm)
The E-flite® Carbon-Z® Cub SS 2.1m makes it easier than ever to enjoy a truly unique and versatile giant-scale flying experience. Based on the original Carbon-Z Cub, it's equipped with an abundance of new convenience, capability and flight performance-improving features. An updated wing design with drooped tips adds wing and aileron area for significantly improved slow speed handling, performance and control. The modified flap design allows them to travel both ways for full-span aileron and other mixing options, and thumbscrews make it easier to install and remove the two-piece wing without tools.
Articulated and shock-absorbing landing gear, equipped with even larger oversized tundra-style wheels with softer tires, offers better ground handling that soaks up the bumps of rough surfaces. The push-button released, top-mounted hatch offers convenient and easy access to the battery compartment – which now holds a quick-release, multi-position battery mounting tray that fits 4S to 6S 3200–7000mAh batteries. An improved motor design featuring an additional bearing, plus a propeller molded from material that better maintains balance and stiffness, results in smoother and more reliable power system performance. The composite-reinforced, hollow-core airframe arrives mostly factory-finished and assembled, and the installed digital, metal-geared servos with ball-link equipped linkages deliver crisp and precise control.
So whether you fly it slow and scale, or perform beyond-scale vertical takeoffs and aerobatics, the Carbon-Z Cub SS will offer unexpected levels of versatility, capability and performance you'll enjoy flight after flight!
More Capability
The Carbon-Z Cub SS features an updated wing design with drooped tips that adds wing and aileron area for better slow speed handling, performance and control – similar to the Plane Booster Wing Tip Set CubCrafters offers for many Cub models. Plus the modified flap design allows them to travel both ways for full-span aileron and other mixing capabilities.
The Carbon-Z Cub SS features an updated wing design with drooped tips that adds wing and aileron area for better slow speed handling, performance and control – similar to the Plane Booster Wing Tip Set CubCrafters offers for many Cub models. Plus the modified flap design allows them to travel both ways for full-span aileron and other mixing capabilities.
More Convenience
Even with its giant-scale 84"/2.1m wingspan, the Carbon-Z Cub SS is easy to store and transport because of the two-piece wing. And now it's more convenient than ever because no tools are required for field assembly/disassembly with the new thumbscrews. There are even decorative gas caps and antennas that snap onto the thumbscrews for added scale detail.
More Capable Gear
The new articulated and shock-absorbing landing gear, which is equipped with even larger oversized tundra-style wheels with softer tires, offers better ground handling that easily soaks up the bumps of rough surfaces. An improved mounting design for the main gear makes it stronger than before, and fully-molded top and bottom landing gear covers deliver a more scale-like appearance.
More Gear Options
An optional float set (EFLA5600) that includes a servo and functional water rudder, plus a new mounting/strut set (EFL12419) that attaches with a more secure rear mount and cross braces, is available separately. Installation is easy, and you have the option to switch between floats and wheels in minutes.
More Practicality
The push-button released, top-mounted hatch offers convenient and easy access to the battery compartment that holds a new quick-release, multi-position battery mounting tray that fits 4S to 6S 3200–7000mAh batteries.
More Reliability
The updated power system features a motor with an improved design that includes an additional bearing, along with a propeller that's molded from material that better maintains balance and stiffness, to deliver smoother and more reliable performance. Plus the ESC is now equipped with an IC5 connector, which is also compatible with EC5 connectors, for better and more reliable power delivery.
Durable Precision
The lightweight and exceptionally strong airframe features composite-reinforced, hollow-core Carbon-Z construction. Best of all it arrives mostly factory-assembled and finished in a vibrant, high-visibility Carbon Cub SS Signature trim and color scheme. It also arrives with factory-installed digital, metal-geared servos and ball-link equipped linkages that deliver crisp and precise control.
Versatile Performance
From smooth and stable slow flight to beyond-scale aerobatics and everything in between, the Carbon-Z Cub SS has an extremely wide flight envelope that's perfect for first-time giant-scale and experienced pilots alike.
Giant Scale
Giant-scale 84"/2.1m wingspan with lightweight and exceptionally strong composite-reinforced, hollow-core Carbon-Z construction
Plug-N-Play® Completion Level
This Plug-N-Play (PNP) model comes out of the box with a power system and factory-installed servos that are ready to connect to the compatible receiver of your choice (sold separately). Simply install the receiver, finish any final assembly and fly!
Aileron:Controlled by two 26g digital metal gear servos
Airfoil Shape:Modified Clark-Y
Approx. Flying Speed:50mph (80kph)
Approximate Assembly Time:Less than 1 Hour
Approximate Flight Time:4-10 minutes
CG (Center of Gravity):4 - 4.7" (102 - 120mm) from leading edge of wing measured at fuselage sides
Charger:Compatible with selected battery (sold separately)
Completion Level:Plug-N-Play
Control Throw (Flaps):0.71" (18mm) take-off, 1.6" (40mm) landing with 2.0 sec speed
Control Throw - High (Ailerons):Up, Down 1.8" (45mm)
Control Throw - High (Elevator):Up 0.98" (25mm), Down 0.59" (15mm)
Control Throw - High (Rudder):Left, Right 0.98" (25mm)
Control Throw - Low (Ailerons):Up, Down 1.6" (40mm)
Control Throw - Low (Elevator):Up 0.71" (18mm), Down 0.39" (10mm)
Control Throw - Low (Rudder):Left, Right 0.59" (15mm)
Elevator:26g digital metal gear servo
Expo (Ailerons):Low Rate 5%, High Rate 10%
Expo (Elevator):Low Rate 5%, High Rate 10%
Expo (Rudder):Low Rate 5%, High Rate 10%
Flaps:Yes
Flying Weight:8.15 - 9.48lb (3.69 - 4.30kg)
Landing Gear:Fixed main with steerable tail wheel
Length:56.3" (1430mm)
Minimum Required Radio:4-channel (sold separately)
Minimum Speed Control:60A
Propeller Size:15x7E
Recommended Motor Battery:4-6S 4000 - 7000mAh LiPo (sold separately)
Retracts:No
Rudder:26g digital metal gear servo
Servos:Digital metal gear mini installed
Spinner Size:2.4" (62mm) orange
Stabilizer Tube Length:10.63" (270mm)
Stabilizer Tube OD:0.27" (7mm)
Transmitter Range:Full
Wing Area:1130 sq in (72.9 sq dm)
Wing Loading:16.6 - 19.3 oz/sq ft (50.7 - 59.0 g/sq dm)
Wing Tube Length:28.75" (730mm)
Wing Tube OD:0.55" (14mm)
Wingspan:84.6" (2150mm)
